One for EDC fans, this offering from Nitecore is a small pocket friendly EDC model flashlight, yet able to put out a very respectable 1000 lumens power, and with a longer range beam of up to 380 metres.
It’s capable of using 2 battery sizes, the supplied 18350 Li-ion rechargeable Battery, or 16340/CR123A. Longer run times are possible with the NL1816R 18350 cell, thanks to it’s higher capacity of 1600mAh. The cell also features a USB-C charging port for convenient re-charging.
Small enough to fit into any pocket or bag/backpack, yet powerful enough to give a long range output, an ideal EDC companion for many uses, including camping, hiking, a back up flashlight or general use. A stainless steel clip also increases your carry options like pocket or pouch.
The strong and durable body is made from aero grade aluminum alloy, additional protection is with the HA III hard coating which resists marks and damage. Rated and tested to IP68 (2 metres submersion), Nitecore also drop tested it to 2 metres.
Compact size of the MT1C Pro: 87.7mm x 26.8mm (length x head diameter), and weight of only 35g (without battery).
Longer range 380 metre beam, with choice of battery power
Using the in house developed UHI 20 LED, this offers increased output, higher efficiency and a more focussed beam for enhanced range. At up to 380 metres throw (top level of 1000 lumens with 35,000cd), an impressive feat for such a compact flashlight.
A lower level of 50 lumens is available too, with a beam distance of 95 metres at this setting.
Dual power source using the supplied 18350 cell or via rechargeable or single use CR123A cells (or 16340).
And a simple single switch UI on the tail cap gives quick and precise control over the flashlight.
Nitecore MT1C Pro: Key Features
> Up to 1000 lumens power with a longer beam range of 380 metres
> New UHI 20 LED, with improved efficiency and power output
> High candela beam of 35000d (1000 lumens)
> Dual power source: 18350 or CR123A (16340)
> USB C charging on the supplied battery (18350)
> EDC Size of 87.7mm x 26.8mm, and a weight of only 35g (no battery)
> Reverse polarity protection> Stainless steel clip
> Simple to operate, with single tail cap switch
> Aluminum alloy body with HAIII hard coating, tempered glass lens cover with anti reflective coatings
> IP68 water resistance, 2 meters submersion, 2 metres drop tested
