Nitecore MT2C Pro Compact 1800 lumens Flashlight

Nitecore MT2C Pro Compact 1800 lumens Flashlight

A small but powerful offering from Nitecore to their ever expanding range of flashlights, the MT2C Pro brings with it a truly EDC form factor size, but with updated Uhi 20 LED offering more range, improved efficiency compared to the MT2C previous model.

Powered via a single replaceable 18650 Li-ion battery, it can also run on 2 x 16340/CR123A cells. The supplied 18650 is a high capacity type with a rating of 3600mAh for extended run times (up to 28 hours). It features a built in type C port on the cell for convenient charging.

It comes with a stainless steel clip, with a rim guard design to prevent accidental activation on the tail cap switch, and provide secure tail standing capability.

Quality finishing with a textured grip area for a secure hold, it’s aluminum alloy body is HA III hardened for improved wear resistance, and has a scratch resistant lens cover. It’s rated to IP68 2 metres water submersion, with an impact resistance rating of 2 metres.

The small EDC flashlight is ideal for a pocket carry at just 117.5mm x 26.8mm (length x head diameter), with a weight of 64g (without the battery).

2 Power levels with a longer range beam up to 520 metres

Nitecore are using the new Uhi 20 LED which gives an impressive output up to 1800 lumens, with 2 levels including a lower one of 50 lumens for up closer activities. Maximum output using 2 x CR123A cells is 800 lumens.

Impressive level of range from this flashlight with a beam distance of 520 metres at the highest 1800 lumens output. (rated to 350 metres using 2 x CR123A cells).

Operation is easy with a single tail switch, half press momentary, with a full press for On/Off, and a half press to cycle the 2 power levels.

Nitecore MT2C Pro - Key Features

> Output of 1800 lumens at the High level with a lower mode of 50 lumens
Range of 520 metres (high mode)
New Nitelab Uhi 20 LED for longer range, improved run times and efficiency
Can be powered with supplied 18650 battery (3600mAh) or via 2 x 16340/CR123A cells
Type C charging on 18650 battery with auto cut off when charged and charge indicators
Run time up to 28 hours (low mode 50lm output)
Simple UI with single tail switch and rim guard to provide stable tail stand and reduce accidental activation of the switch
EDC size - 117.5mm x 26.8mm, weight of 64g without battery
Aluminum alloy body, with stainless steel clip, hardened lens cover
IP68 water proof 2 metres, drop tested to 2 metres

Bruce Lee
Bruce’s our Editor here at Flashlightgo.Since editing and filming are not only his job, but also one of his most favorite things to do.He loves the outdoors, and hiking and backpacking, and any chance He can get to be outside. With a passion for any type of gear ranging from electronic gadgets to Flashlight or EDC gear.

And for a little more detail, Please