Convoy flashlights offer a wide range of LED, color-temperature, driver and mode options. That flexibility is useful, but the labels can be confusing when you are ordering. This guide explains what each choice means, how to match the options to your needs, and what to check before adding a light to your cart.
Options vary by model and by the specific configuration offered on each product page. A model may offer LED and color-temperature choices without a driver selector, while another may list several driver outputs or mode groups. Always choose from the options shown on the product page you are buying; do not assume every Convoy model supports every configuration.
Start with the Job: Throw, Flood or Color Quality?
Before choosing a specific LED, decide how you will use the flashlight:
- Long-distance visibility: Look for a focused beam and a throw-oriented LED/reflector combination, such as SFT40 in models that offer it.
- General-purpose use: Choose a balanced beam that gives you a useful hotspot and surrounding spill.
- Close-range work and natural-looking colors: Consider a high-CRI option such as Nichia 519A or B35AM when available. These are often chosen for color quality and comfortable near-field illumination.
- High output: Larger or higher-power emitters can produce more total light, but may draw more current, create more heat and require a suitable battery.
The reflector or optic matters as much as the LED. The same emitter can look different in different flashlight heads. Check the product description and beam photos rather than choosing by the LED name alone.
How to Choose an LED

An LED choice affects beam shape, output, color quality, power demand and, in some cases, which driver is required. These are practical starting points, not guarantees for every model:
- SFT40: A common choice when you want a more concentrated hotspot and useful throw. The exact beam depends on the host flashlight and reflector.
- Nichia 519A: Often selected for high color rendering and a pleasant beam for everyday, indoor and close-range use.
- B35AM: A high-CRI option available in some Convoy models and color temperatures. It is often chosen when color quality is a priority.
- XHP70.3 HI: A high-output option used in compatible hosts. It can provide a broader, powerful beam than small-die throw-oriented setups, depending on the flashlight's reflector.
- Specialty or very high-output LEDs: Options such as LHP73B, SFT-90 or F150R may need a high-drain cell and careful attention to the product's battery and driver requirements.
Choose an LED that the product page lists for that model. Do not assume an LED can be paired with any driver, reflector or flashlight body.
What Does Color Temperature (CCT) Mean?

Color temperature, measured in kelvin (K), describes whether white light looks warmer or cooler. It does not describe brightness, throw or color-rendering quality.
- About 3000K: Warm white, with a yellowish appearance. Some users prefer it for a softer-looking beam and outdoor use in haze or rain.
- About 4000K: Neutral-to-warm white. A balanced choice if you find cool white too harsh.
- About 5000K: Neutral white, often a versatile everyday option.
- About 5700K: Neutral-to-cool white, depending on the LED and tint.
- About 6000–6500K: Cool white with a bluer appearance. It can look crisp, though some people prefer a warmer or more neutral tone.
These are broad visual descriptions. The same CCT can look different across LED models, batches and individual preferences. CCT is also separate from tint and CRI: two LEDs at 5000K can render colors differently or have a different green, rosy or neutral tint.
Not every CCT is available for every LED. Select an LED first, then choose only a color temperature shown as compatible with that LED on the product page.
Understanding Driver Options
The driver regulates power from the battery to the LED. The correct driver depends on the LED's voltage and current requirements, the flashlight's battery setup and the intended user interface. A higher amp number is not automatically a better choice.
- Linear driver: Uses a relatively direct regulation method. Depending on the voltage difference and current, some input power is dissipated as heat. It can be a straightforward option for compatible LED and battery combinations.
- Buck driver: Steps voltage down. It is commonly used where the battery voltage is higher than the LED's required voltage, and can be more efficient than a linear approach in suitable high-current applications.
- Boost driver: Steps voltage up. It can power an LED that requires a higher voltage than a single-cell battery provides, when the host and LED are designed for that combination.
Convoy listings may identify a driver by its topology, output voltage/current, or user interface—for example, “3V 8A buck” or “6V 5A boost.” Treat the exact product-page pairing as authoritative. If the driver is already fixed by the LED selection, there may be no separate driver option to choose.
For example, the Convoy M21B MAO listing pairs different LED models with different driver outputs. That is why driver selection should follow the LED and host requirements instead of being treated as a free-standing performance upgrade.
What Are “4 Modes” and “12 Groups”?
These labels describe the flashlight's operating interface, not the LED. A fixed 4-mode driver gives you a set sequence of brightness levels. A 12-group driver offers a choice among several preset mode sequences; it does not mean the flashlight has twelve brightness levels in one cycle, and it is not the same as a continuously ramping interface.
Mode groups can differ in the number and order of brightness levels, and some groups include extras such as strobe, SOS, biking mode or battery check. The group names and available sequences can vary with the driver version. Check the specific listing before ordering if a particular sequence matters to you.
Example: Selecting a mode group on the Convoy M21B MAO

The current Convoy M21B MAO instructions describe this sequence for its configurable 12-group interface. It is an example for this model/version; do not assume the exact entry method applies to every Convoy flashlight.
- Turn the flashlight on.
- Quickly half-press the switch 20 times or more to enter configuration mode.
- When the flashlight signals the first option with a flash and buzz, half-press to enter mode-group selection.
- Wait for the number of flashes corresponding to the group you want, then half-press during that signal to select it.
- If you want to change mode memory, follow the separate memory option in that model's instructions.
For example, one group may cycle through several brightness levels in ascending order, while another may use only three levels or place high output first. Read the sequence for your intended group before selecting it. If you miss the signal or are unsure whether a setting was saved, consult the exact product instructions before repeating the procedure.
Important: The switch sequence and signal pattern are driver-specific. Some listings use “tap” to mean a brief half-press; a full click is used to turn the light on or off. Follow the instruction page for the exact light in hand.
Battery Compatibility and High-Drain LEDs
Check the battery size, cell type and battery-included status on the product page. A flashlight that takes a 21700 cell may specify a flat-top cell, a protected or unprotected cell, or a minimum discharge capability. These details are not interchangeable across all Convoy models.
For the Convoy M21B MAO, one standard 21700 lithium-ion battery is required and the battery is sold separately. The FlashlightGo product listing should state the exact compatible battery type. For the M21B's LHP73B, SFT-90 and F150R configurations, use a high-drain 21700 cell capable of more than 20A continuous discharge. The manufacturer lists EVE 40PL, EVE 50PL, Molicel P45B, Molicel P50B, Samsung 50S and Ampace JP40 as suitable examples.
Do not choose a battery by capacity (mAh) alone. Match the cell's discharge rating to the LED configuration, use an undamaged cell of the specified type, and follow the flashlight and battery maker's guidance. If you are uncertain whether a battery is compatible, ask before ordering.
How to Configure a Convoy Flashlight on FlashlightGo

- Open the exact model and finish. Similar model names can have different emitters, drivers, batteries and option menus.
- Choose the LED. Start with your use—throw, balanced illumination, high color quality or maximum output.
- Choose a CCT if the page offers it. Select only a temperature listed for the selected LED.
- Choose a driver or mode option only if it appears. Match the description to the LED and read whether the choice changes the user interface, current or both.
- Check the battery requirements. Confirm size, flat-top/button-top, protected/unprotected, discharge needs, and whether a battery is included.
- Review the selected variant before checkout. Confirm the summary, price and battery status match your intended configuration.
FlashlightGo's available options are shown on each product page and may be narrower than the manufacturer's full configuration range. The checkout choices are the configurations currently offered for that item.
Common Configuration Mistakes to Avoid
- Choosing the highest amp driver by default: The driver must match the LED and host; more current can create excess heat or damage an incompatible emitter.
- Assuming every LED has every CCT: Available color temperatures depend on the emitter and product.
- Mixing up 12 groups with twelve modes: You select one preset sequence from the available groups.
- Expecting every flashlight to use the same programming steps: Check the exact model's instructions and driver version.
- Buying a battery based only on mAh: High-output configurations may need a high-drain cell.
- Assuming the battery is included: Many Convoy flashlights are sold without a battery. Check the product page before checkout.
Quick Decision Guide
- For a focused beam and distance, compare throw-oriented LED options such as SFT40 in compatible models.
- For natural color rendering and close-range use, consider 519A or B35AM where offered.
- For a warmer-looking beam, choose a lower CCT; for a cooler appearance, choose a higher CCT.
- For driver choices, follow the LED/host compatibility listed on the product page.
- For simple operation, check the listed mode sequence; choose a 12-group driver only if you want to select among its preset groups.
- For high-output LEDs, verify the exact battery discharge requirement before ordering.
Explore More Convoy Guides and Models
For a model-by-model overview and help matching Convoy flashlights to different uses, read our Convoy Flashlights Guide. Then browse the Convoy flashlight collection and check the configuration notes on the product page for the model you choose.
Explore Convoy Models with Configurable LED Options
Compare the available configurations on these Convoy product pages:
- Convoy L21B Camo Black – choose from available LED, color-temperature and driver or mode options.
- Convoy M21B 21700 – compare LED, color-temperature and body-color choices.
- Convoy M21H 21700 TIR – review its LED, optic and driver combinations.
Configuration availability and operating instructions can change by model, driver and production version. Confirm the current product-page details before ordering or programming your flashlight.
