The Nitecore TINI2 is a small EDC flashlight for daily use, light and comfortable to carry in your pocket or bag. It features a small and bright OLED display, 2 emitters, 2 side electronic switches and a Type C charging port. The OLED display is multifunctional and shows in real time some data of the flashlight such as lumens, cell voltage, remaining autonomy, output levels and information on the interface block. When the light is off, when the “MODE” switch is pressed, the display will show the selected output level, the user mode and the current cell voltage for a few seconds. On the other hand, when the light is on, the screen will show in sequence the brightness level, the current lumens, the user mode (Demo or Daily) and then the remaining time before the battery is completely discharged. To enable the display to be reactivated, simply press the “MODE” button.

Under the OLED multifunctional display the Nitecore TINI2 has two electronic switches for managing the interface. One acts as an ON / OFF switch (Power Switch) for turning the torch on and off and the other for changing the 4 available levels and for using the momentary Turbo (Mode Switch).The Nitecore TINI2 also has two electronic lockout modes that guarantee safe portability and avoid accidental activation of the flashlight. Nitecore TINI2 uses a new generation USB-C port as charging interface protected by a rubber cap that prevents dirt and water from penetrating inside. The internal battery is lithium and has the capacity of 280mAh to provide a maximum autonomy of about 60 hours on the lowest level.

The Nitecore TINI2 also has an intelligent charging circuit with multiple protections against over-discharge, overload, short-circuit. Charging takes approximately 1 hour and 45 minutes. During the charging process, the blue status indicator will flash slowly and the display will show the battery status. When charging is complete, the blue status LED will remain steady and the display will show the charging completed symbol.

In the back of the Nitecore TINI2 there is a small steel metal ring (resistant up to 0.3kg in weight) and which offers the possibility of hooking the flashlight, for example, to a keychain using the supplied carabiner. The Nitecore TINI2 has five levels of brightness with direct access to TURBO and ULTRALOW. It also has 2 different user modes, “DEMO” and “DAILY”, for different user needs. When the light is set in “DEMO” mode (which is the default), the light will turn off automatically, within 30 seconds, if no user operation is performed. The countdown will be indicate on the multifunction display. When the light is set “DAILY” mode, the light will remain on until the user turns it off. The "TURBO" level will momentary only and can be activated by holding down the "MODE" button.

The emitters of the TINI2 are OSRAM P8 LEDs, the lens is a TIR which guarantees a soft and uniform beam. The Nitecore TINI2 has a maximum power of 500 lumens per Turbo and a maximum reachable distance of about 89 meters. The body of the TINI2 is made of anodized aluminum and is impact resistant up to 1 meter in height. The degree of impermeability is guaranteed according to the IP54 standard. The package includes, in addition to the flashlight, also a key ring and a small carabiner.

Features:

> Utilizes LEDs with a max output of 500 lumens

> Max peak beam intensity of 2,000d and max throw of 89 meters

> Utilizes a total reflective optic lens for uniform and soft light

> Multif inctional OLED real-ime display for lumens, battery voltage and runtime etc.

> Built- in 280mAh LHon battery

> Advanced Power Cut-Off (APC) technology for an ultra How standby power consumption

> Bult-in Lion battery charging circuit with a USB-C port

> Highly efficient constant current circuit provides a stable output up to 60 hours

> 2 user modes available (DEMO Mode and DAILY Mode)

> Dual side switch design

> 5 brightness levels available with direct access to TURBO

> Intelligent mode memory function

> 2 lockout modes available (Half Lockout Mode and Full Lockout Mode)

> Incorporated Advanced Temperature Regulation (ATR) module

> Metal ring pull able to withstand up to 30 kilograms of weight

> HA II hard anodized finish

> Impact resistant to 1 meter

Specifications:

> LED：2x OSRAM P8

> Maximum Brightness：500 lumen

> Peak Beam Distance：97 yards

> Peak Beam Intensity：2000 cd

> IP Rating：IP54

> Impact Resistance：1 m

> Dimensions：L-1.83"xW-0.98"xH-0.49"

> Weight：0.66oz

> Turbo 500 lumen 15 min

> High 200 lumen 45 min

> Mid 65 lumen 2.5 hr

> Low 15 lumen 8 hr

> Ultralow 1 lumen 60 hr

SHIPPING
The final shipping cost and estimated delivery timeframe will be available to you during checkout. Currently, we offer 3 International shipping methods which are steady and easy to track. Priority worldwide shipping, Premium ( Partial countries) and a faster Express shipping. The estimated times stated below are not guaranteed. An international package could experience delays like postal strikes or severe weather or Cov-19 situation. All shipping ways, PO Box address is not acceptable.

For some flashlights, there's a pure battery inside（phone charging）,If We can not ship your packages via USPS or DHL,we'll ship your package in another way.

If you don’t receive your order within the estimated time frame provided below and suspect that it might be lost in transit, please contact Flashlightgo Support ( support@flashlightgo.com ) and we can look into the order with the courier. Lost-in-transit requests must be submitted to Flashlightgo Support within 3 months of the date of shipping or before the courier archives the tracking information.

Option 1.
Express by DHL/UPS/Fedex/Aramax/SF etc ( there may be tax need to pay in this way),
The estimated time of delivery is usually 3-7 work days depending on the country. Includes detailed tracking and confirmation of delivery.

Option 2.
Premium ( 6-10days, All tax and Duty Paid),
All tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Option 3.
Priority shipping(1-2 Weeks, average 10 days)
If we marked it is with all tax and duty paid, all tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Learn more,Please click on Here.

To ensure that you get the desirable product, we allow a seven-day product return period. Any product return application outside this period will not be entertained.
All returned product must be unused and the original package should be kept.

Return：
We do not offer return for personal products like socks and hats or food, magazine and fragile or dangerous products The original receipt must be available for application of return.

Discount products：
No product return for discount products

Gifts products：
If the item is marked as a gift when purchased and shipped directly to you, it cannot be exchanged , refunded or warranty.

Exchange：
We only replace items if they are defective or damaged.
Exchange service are offered only to wrong deliveries or product damage not caused by client. If needed, please email to info@flashlightgo.com.

Warranty
How long is the warranty period?
Flashlightgo warrants to the original purchaser that the Product(s) shall be free of any defect in material or workmanship for a period of one year for labor and one year for parts from the date of the original order except the items listed below:
Chargers,Batteries and Other Accessories: 3 months warranty

Should the Product(s) supplied by Flashlightgo prove defective because of improper workmanship or material as reasonably determined by us, Flashlightgo agrees, at its option, to either repair or replace the Product free of charge, excluding any shipping or handling charges.

Learn more,Please click here.