The Olight Baton 3 Pro was born as an upgrade of the previous Olight S2R version but increases its characteristics and power. With the Olight Baton 3, in fact, you pass to a maximum output of 1500 lumens, therefore 30% more than the previous version.

Compared to the previous version, the proximity sensor has been technologically improved and has been designed to increase the light output of the flashlight during everyday use. The sensor allows the flashlight to decrease the light intensity if an obstacle is too close to the lens. This guarantees maximum safety in use.

The Olight Baton 3 Pro is available for purchase in two different versions: there is in fact the possibility to choose the equipment with cold light LEDs from 5700 - 6700 K or with Natural light from 4000 - 5200 K. In this way it satisfies all the requirements. needs and can be useful for different scenarios.

The user interface is managed entirely by a lateral electronic switch. It is concave and enlarged and this makes it very comfortable to touch and activate. In the center of the side switch there is a small status LED that informs the user about the amount of residual charge in the cell. When this is green it means that the cell capacity is over 60%, when it is orange 10 - 60%, when it is red 5 - 10%, flashing red less than 5%.

There is direct access to moonlight mode by simply holding down the switch from the flashlight off. The power for this level is only 0.5 lumens and the runtime is 120 days. There is also direct access to the Turbo with a double click on the switch, and access to the strobe with a quick triple press of the switch. The Olight Baton 3 Turbo also has a very convenient timer function: it is in fact possible to set a timer of 3 or 9 minutes for the automatic shutdown of the flashlight. To activate it, just turn on the flashlight at the desired level, double click on the switch and continue to keep it pressed until the flashlight emits one flash (3-minute timer active) or two flashes (9-minute timer active).

The power supply of the Olight Baton 3 Pro is guaranteed by a 3200mAh rechargeable 18650 lithium cell. This is recharged using the special magnetic USB cable supplied in about 3.5 hours.

The tailcap is magnetic so the flashlight can be attached to metal surfaces and allows for hands-free use. Supplied with the torch comes an L-shaped metal support that can be installed for example on the wall and where the torch can be attached and stored when not in use.

GENERAL DATA
Beam Distance: 574 ft (175 m)
Max Performance: 1,500 lumens
Charging Type: MCC 3 Magnetic Charging Cable
Compatible Batteries: Customized 3200mAh 3.6V 18650 Rechargeable Lithium-ion Battery
Max Light Intensity: 7,900 candela
Light Source: High Performance CW / NW LED
Lens / Reflector Type: TIR Optic Lens
Mode Operation: Side Switch
Form / Size Factor: Medium size
Series: Series Baton (EDC, General Use)

LIGHTING LEVELS
LEVEL 1:   1,500~600 lumens
Run time LEVEL 1:   2 + 177 minutes
LEVEL 2:   600~120 lumens
Run time LEVEL 2:   180 + 25 minutes
LEVEL 3:   120 lumens
Run time LEVEL 3:   17 hours
LEVEL 4:   15 lumens
Run time LEVEL 4:   100 hours
LEVEL 5:   0.5 lumens
Run time LEVEL 5:   120 days
Strobe: Yes
SOS / BEACON:   No

TECHNICAL CHARACTERISTICS
Waterproof:   IPX8
Weight:   3.63 oz (103 g)(Battery Included)
Length:   3.99 in (101.4 mm)
Head Diameter:   0.91 in (23 mm)
Body Diameter:   0.91 in (23 mm)
Use:   Camping, Hiking, Mountaineering, Household

PACKAGE CONTENTS
Baton 3 Pro (Battery Included) x1
MCC3 Charging Cable x 1
L-shape Stand ×1
Pouch ×1
User Manual ×1

SHIPPING
The final shipping cost and estimated delivery timeframe will be available to you during checkout. Currently, we offer 3 International shipping methods which are steady and easy to track. Priority worldwide shipping, Premium ( Partial countries) and a faster Express shipping. The estimated times stated below are not guaranteed. An international package could experience delays like postal strikes or severe weather or Cov-19 situation. All shipping ways, PO Box address is not acceptable.

For some flashlights, there's a pure battery inside（phone charging）,If We can not ship your packages via USPS or DHL,we'll ship your package in another way.

If you don’t receive your order within the estimated time frame provided below and suspect that it might be lost in transit, please contact Flashlightgo Support ( support@flashlightgo.com ) and we can look into the order with the courier. Lost-in-transit requests must be submitted to Flashlightgo Support within 3 months of the date of shipping or before the courier archives the tracking information.

Option 1.
Express by DHL/UPS/Fedex/Aramax/SF etc ( there may be tax need to pay in this way),
The estimated time of delivery is usually 3-7 work days depending on the country. Includes detailed tracking and confirmation of delivery.

Option 2.
Premium ( 6-10days, All tax and Duty Paid),
All tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Option 3.
Priority shipping(1-2 Weeks, average 10 days)
If we marked it is with all tax and duty paid, all tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Learn more,Please click on Here.

To ensure that you get the desirable product, we allow a seven-day product return period. Any product return application outside this period will not be entertained.
All returned product must be unused and the original package should be kept.

Return：
We do not offer return for personal products like socks and hats or food, magazine and fragile or dangerous products The original receipt must be available for application of return.

Discount products：
No product return for discount products

Gifts products：
If the item is marked as a gift when purchased and shipped directly to you, it cannot be exchanged , refunded or warranty.

Exchange：
We only replace items if they are defective or damaged.
Exchange service are offered only to wrong deliveries or product damage not caused by client. If needed, please email to info@flashlightgo.com.

Warranty
How long is the warranty period?
Flashlightgo warrants to the original purchaser that the Product(s) shall be free of any defect in material or workmanship for a period of one year for labor and one year for parts from the date of the original order except the items listed below:
Chargers,Batteries and Other Accessories: 3 months warranty

Should the Product(s) supplied by Flashlightgo prove defective because of improper workmanship or material as reasonably determined by us, Flashlightgo agrees, at its option, to either repair or replace the Product free of charge, excluding any shipping or handling charges.

Learn more,Please click here.