Olight Warrior 3S tactical flashlight with 2300 lumens and equipped with TIR lens for a clean and balanced beam that reaches a maximum distance of 300 meters with a maximum light intensity of 23000 cd.

The cigar design of the Olight Warrior 3S is ideal for tactical applications but also as a classic EDC. The body is made of aeronautical aluminum alloy and is resistant to scratches and wear. Perfect anodizing and satin finishing on the whole body of the flashlight.

In the central part of the body there is a knurling process that gives the flashlight a perfect grip in any condition even with wet hands or if you are wearing tactical gloves.
The belt clip is made of stainless steel and can be used in both directions. The flashlight can therefore be easily attached to belts, pockets, backpacks, tactical vests and M.O.L.L.E.

The Olight Warrior 3S has two electronic switches for interface management.
The tail switch is large and easy to activate and allows the torch to be turned on and off, as well as the activation of the momentary light. It is two-stage and allows you to activate the STrobo or Turbo with a single press (direct access to Turbo and Strobo) as indicated in the user manual.

The side switch instead allows you to change the output level. The possible levels are Moonlight, Low, Medium, High and Turbo. The lowest level is only 1 lumen and is ideal as a light point or to illuminate in very short distances.The runtime for the Moonlight level is 55 days.

Next to the side switch there are small status LEDs: those on the right indicate the battery level and therefore the state of charge, while those on the left indicate the selected brightness level.

The battery is recharged by means of the magnetic charging interface located on the tail switch. To charge the Warrior 3S Olight provides a custom USB magnetic charger model MCC3 in the package. Just bring the cable close to the flashlight that it will immediately position itself in the correct position and the charge will begin.

At the front the Warrior 3S has a proximity sensor that automatically decreases the brightness when the flashlight is near an obstacle. The brightness will be increased automatically when the obstacle will no longer be present. The proximity sensor therefore increases the safety of the torch.

The Olight Warrior 3S can also be mounted on weapons and used via the sRod-7 magnetic switch and E-WM25 support both optional and sold separately.

The Bezel protecting the lens is protruding, laced and smooth. This improves the carrying of the flashlight in the pocket. The smoother bezel in fact reduces the possibility of the flashlight getting caught in clothing.

The package also includes a sturdy nylon holster that always guarantees maximum protection to the flashlight. There are belt loops on the back of the holster. The closure takes place by means of a buckle and the torch inside is protected and safe.

The supplied cell is a 3.6V custom 21700 with a capacity of 5000mAh.

Flashlight size is 1.03in (26.2mm) long, 1.16in / 29.5mm body diameter, 1.16in / 29.5mm head diameter for a weight of 6, 21 oz / 176 g (including battery). The water resistance is IPX8 therefore submersible for 2 meters, while the impact resistance is 1.5 meters.

Body Material: Aluminum Alloy
GENERAL DATA
Beam Distance: 984 ft (300 m)
Max Performance: 2,300 lumens
Charging Type: MCC3 USB Magnetic Charging Cable
Compatible Batteries: Customized 3.6V 5000mAh 21700 Lithium-ion Battery
Max Light Intensity: 23,000 cd
Light Source: High Performance Cool White LED
Lens / Reflector Type: TIR Optic Lens
Mode Operation: Dual Switch
Form / Size Factor: Medium Size

LIGHTING LEVELS
Turbo: 2,300~800~250 lumens
Run time Turbo: 2.5+160+39 minutes
High: 800~250 lumens
Run time High: 166+39 minutes
Med: 200 lumens
Run time Med: 13 hours
Low: 15 lumens
Run time Low: 130 hours
Moon: 1 lumen
Run time Moon: 55 days
Strobe: Yes

TECHNICAL CHARACTERISTICS
Waterproof: PX8
Weight: 6.21 oz/176 g (Including Battery)
Length: 5.47 in/139 mm
Body Diameter: 1.03 in (26.2 mm)
Use: Everyday Carry, Outdoors, Self-defense, Law Enforcement

PACKAGE CONTENTS
Warrior 3S (Battery Included) x 1
Pocket Clip x 1
MCC3 USB Magnetic Charging Cable x 1
Holster x 1
User Manual x 1

SHIPPING
The final shipping cost and estimated delivery timeframe will be available to you during checkout. Currently, we offer 3 International shipping methods which are steady and easy to track. Priority worldwide shipping, Premium ( Partial countries) and a faster Express shipping. The estimated times stated below are not guaranteed. An international package could experience delays like postal strikes or severe weather or Cov-19 situation. All shipping ways, PO Box address is not acceptable.

For some flashlights, there's a pure battery inside（phone charging）,If We can not ship your packages via USPS or DHL,we'll ship your package in another way.

If you don’t receive your order within the estimated time frame provided below and suspect that it might be lost in transit, please contact Flashlightgo Support ( support@flashlightgo.com ) and we can look into the order with the courier. Lost-in-transit requests must be submitted to Flashlightgo Support within 3 months of the date of shipping or before the courier archives the tracking information.

Option 1.
Express by DHL/UPS/Fedex/Aramax/SF etc ( there may be tax need to pay in this way),
The estimated time of delivery is usually 3-7 work days depending on the country. Includes detailed tracking and confirmation of delivery.

Option 2.
Premium ( 6-10days, All tax and Duty Paid),
All tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Option 3.
Priority shipping(1-2 Weeks, average 10 days)
If we marked it is with all tax and duty paid, all tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Learn more,Please click on Here.

To ensure that you get the desirable product, we allow a seven-day product return period. Any product return application outside this period will not be entertained.
All returned product must be unused and the original package should be kept.

Return：
We do not offer return for personal products like socks and hats or food, magazine and fragile or dangerous products The original receipt must be available for application of return.

Discount products：
No product return for discount products

Gifts products：
If the item is marked as a gift when purchased and shipped directly to you, it cannot be exchanged , refunded or warranty.

Exchange：
We only replace items if they are defective or damaged.
Exchange service are offered only to wrong deliveries or product damage not caused by client. If needed, please email to info@flashlightgo.com.

Warranty
How long is the warranty period?
Flashlightgo warrants to the original purchaser that the Product(s) shall be free of any defect in material or workmanship for a period of one year for labor and one year for parts from the date of the original order except the items listed below:
Chargers,Batteries and Other Accessories: 3 months warranty

Should the Product(s) supplied by Flashlightgo prove defective because of improper workmanship or material as reasonably determined by us, Flashlightgo agrees, at its option, to either repair or replace the Product free of charge, excluding any shipping or handling charges.

Learn more,Please click here.