LED:
Cool White 5700K-6500K
NVSW519AT 5000K R9080
NVSW519AT 4000K R9080
NVSW519AT 3000K R9080

Max output:
ANSI 1300 Lumens (Cool White 5700K-6500K )
ANSI 800 Lumens (Nichia 519A 5000K R9080)
ANSI 760 Lumens (Nichia 519A 4000K R9080)
ANSI 670 Lumens (Nichia 519A 3000K R9080)

Max runtime: Few months
Max beam distance: 123 meters
Max peak beam intensity: 3800cd
Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×18650 , 2x CR123A , 2x RCR123A
Rated Range: 2.7V ~ 8.4V

Dimension:
Length 99.9mm / 3.93 inch
Head diameter 23.5mm / 0.93 inch
Body diameter 21.6mm/0.85 inch

Weight: 48g / 1.69oz (without battery)
Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring
________________________________________
Operation
1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head.
Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad.
________________________________________

1. ON/OFF

Single-click the side switch to turn the light on/off. When the light is turned off,

it will memorized the current brightness level or mode.

2. CHANGE BRIGHTNESS LEVEL

When the flashlight is OFF :

Single-click the switch to select

 (H-M1-M2).

Press and hold the switch for 0.5 seconds to select (L1/L2).

Double-click quickly to switch  (T1/T2).

Triple-click quickly to switch to  (S1/S2/S3).

When the flashlight is ON in

, , or 

Press and hold the switch to cycle through levels. The level will be set when the switch

is released, and it will be memorized when turned off.

When the flashlight is ON in  

Quickly double-click to switch , and quickly double-click again to return

to the previous level.

Quickly triple-click to switch , and quickly triple-click again to return to

the previous level.

Quickly click and hold to toggle between  and

.

When the flashlight is ON in 

Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be

turned off.

3.LOCK-OUT FUNCTION & LOCATION INDICATOR

When the flashlight is off , quickly click the switch 4 times to enter the lockout mode

(the location indicator will activate at the same time, flashing once every second).

Double-clicking the switch will turn the indicator on or off.

Quickly click the switch 4 times again to unlock the button and activate Low mode.

4. LOW VOLTAGE INDICATOR

When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,

and the light flashes rapidly every 2 minutes.

When the battery voltage drops below 2.7V, the light will turn off.

Charging instructions and notices
In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not.
Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system.
 

Updated hidden features （May 2023）

The low to M/H shortcut, 1 click + 1 hold click.

In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2， cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.)

Features
1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation.
2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3.Rugged indestructible aluminum body with anti-scratching type III hard anodization
4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
5.Side switch button to transferring mode, user-friendly interface to adjust output.
6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
8.Intelligent temperature control technology for flashlight stable and safe use.
9.Reverse polarity protection, to protect from improper battery installation.
10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected.
11.When light lockout, location indicator will flash, easy get the light in dark.
12.Magnetic tail, can be used in many special occasions, use as candle light, etc.

SHIPPING
The final shipping cost and estimated delivery timeframe will be available to you during checkout. Currently, we offer 3 International shipping methods which are steady and easy to track. Priority worldwide shipping, Premium ( Partial countries) and a faster Express shipping. The estimated times stated below are not guaranteed. An international package could experience delays like postal strikes or severe weather or Cov-19 situation. All shipping ways, PO Box address is not acceptable.

For some flashlights, there's a pure battery inside（phone charging）,If We can not ship your packages via USPS or DHL,we'll ship your package in another way.

Note:
When you place an order for just the batteries, for easy shipping, faster and safe delivery, the batteries are placed in the flashlights.

If you don’t receive your order within the estimated time frame provided below and suspect that it might be lost in transit, please contact Flashlightgo Support ( support@flashlightgo.com ) and we can look into the order with the courier. Lost-in-transit requests must be submitted to Flashlightgo Support within 3 months of the date of shipping or before the courier archives the tracking information.

Option 1.
Express by DHL/UPS/Fedex/Aramax/SF etc ( there may be tax need to pay in this way),
The estimated time of delivery is usually 3-7 work days depending on the country. Includes detailed tracking and confirmation of delivery.

Option 2.
Premium ( 6-10days, All tax and Duty Paid),
All tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Option 3.
Priority shipping(1-2 Weeks, average 10 days)
If we marked it is with all tax and duty paid, all tax and duty are prepaid to carrier by Flashlightgo before shipping, so you dont need to pay any tax or duty when you get it.

Learn more,Please click on Here.

To ensure that you get the desirable product, we allow a seven-day product return period. Any product return application outside this period will not be entertained.
All returned product must be unused and the original package should be kept.

Return：
We do not offer return for personal products like socks and hats or food, magazine and fragile or dangerous products The original receipt must be available for application of return.

Discount products：
No product return for discount products

Gifts products：
If the item is marked as a gift when purchased and shipped directly to you, it cannot be exchanged , refunded or warranty.

Exchange：
We only replace items if they are defective or damaged.
Exchange service are offered only to wrong deliveries or product damage not caused by client. If needed, please email to info@flashlightgo.com.

Warranty
How long is the warranty period?
Flashlightgo warrants to the original purchaser that the Product(s) shall be free of any defect in material or workmanship for a period of one year for labor and one year for parts from the date of the original order except the items listed below:
Chargers,Batteries and Other Accessories: 3 months warranty

Should the Product(s) supplied by Flashlightgo prove defective because of improper workmanship or material as reasonably determined by us, Flashlightgo agrees, at its option, to either repair or replace the Product free of charge, excluding any shipping or handling charges.

Learn more,Please click here.