Convoy T4 MAO Aluminum Alloy AA and 14500 Flashlight

In stock
SKU: convoy-t4-mao-519a-5700k
Regular price $34.99

The Convoy T4 MAO is a dual-cell everyday-carry flashlight featuring an aluminum-alloy body with a micro-arc oxidation (MAO) finish. The MAO surface gives this version a distinctive matte, ceramic-like appearance while keeping the familiar T4 form. Choose the LED emitter and its available color temperature to match your preferred beam and light quality.

How to Choose Your T4 LED Configuration

Step 1 — Choose the LED. Start with the emitter that best suits your use. Nichia 519A and 219 options are suitable when color rendering and natural-looking colors are priorities. LH351D and SST20 provide alternative general-purpose white-light choices. SFT-25R and SFT40 offer more focused beam options. The CSLNM1.TG and CSLNM1.14 variants provide additional focused or colored-light choices, while LHP531 and W5050SQ5 offer further output and CCT combinations.

Step 2 — Choose the available color temperature. Select only a CCT offered for the chosen LED. Lower values such as 2700K and 3000K look warmer; 4000K to 5000K appear more neutral; 5700K and 6500K look cooler. Some emitters have fewer CCT choices, and the blue-light option is identified separately rather than as a white-light CCT.

Step 3 — Confirm the selected combination. Before adding the flashlight to your cart, check that the LED and CCT or light-color values shown in the selector match your intended configuration. Not every LED is offered in every color temperature.

Two-Battery Setup

The T4 requires two cells to operate. Choose either 2 × AA batteries (1.5V alkaline or 1.2V NiMH) or 2 × 14500 button-top 3.7V rechargeable lithium-ion batteries. The manufacturer also lists compatible 1.6V–1.8V lithium primary cells. Batteries are not included and can be selected separately through the compatible-battery section.

Use two matching cells with the same chemistry, type, capacity, and charge state. Do not mix different chemistries, old and new cells, or cells at different charge levels. Do not operate the flashlight with only one cell.

How to Configure the 13 Mode Groups

The T4 uses a mechanical tail switch and offers 13 mode groups. To enter configuration, turn the flashlight on and tap the switch rapidly 10 times. The flashlight signals each menu option with flashes and a buzz-flash; no screen or app is required.

  1. Select a mode group: At Option 1, indicated by one normal flash followed by a buzz-flash, tap the switch to enter group selection. The light then signals the available groups in sequence. Tap while your preferred group is being signaled.
  2. Choose the output sequence: The groups arrange low, medium, and high levels in different orders. Depending on the selected group, additional functions may include strobe, biking, battery check, or SOS. Group 13 provides 100% output only.
  3. Set mode memory: At Option 2, indicated by two normal flashes followed by a buzz-flash, tap to toggle mode memory. If no selection is made, the light exits configuration and returns to its previous mode.

Battery-Dependent Operation and Safety

  • With 2 × 14500 cells, maximum driver current is 3000mA; low-voltage warning and battery-check indication are supported.
  • With 2 × AA cells, maximum driver current is 1000mA. The manufacturer specifies no low-voltage warning or battery-check indication in 1.5V AA mode.
  • The T4 does not have reverse-polarity protection. Check cell orientation carefully before installation.
  • Use button-top 14500 cells for the rechargeable lithium-ion configuration.

Technical Specifications

  • Body material: Aluminum alloy
  • Finish: Micro-arc oxidation (MAO)
  • Battery configuration: 2 × AA or 2 × 14500 button-top cells
  • Interface: Mechanical tail switch with 13 mode groups
  • Maximum driver current: 3000mA with 2 × 14500; 1000mA with 2 × AA
  • Lens: Light-green coated glass
  • Reflector: Orange peel
  • Mode memory: Selectable
  • Tailstand: Yes
  • Reverse-polarity protection: No

Batteries are not included. This listing is for the Convoy T4 MAO aluminum-alloy flashlight.