Convoy T4 Gray Alloy AA and 14500 Flashlight

In stock
SKU: convoy-t4-gray-aluminum-519a-5700k
Regular price $24.99

The Convoy T4 in Gray is a dual-cell everyday-carry flashlight with an aluminum-alloy body and a distinctive gray finish. Choose from a range of LED emitters and color temperatures to tailor the beam to your preferences.

Choosing the LED and Color Temperature

Select the LED first, then choose an available color temperature for that emitter. Nichia 519A and 219 options are suitable for users who prioritize color quality. SST20 and LH351D offer alternative general-purpose beam characteristics, while options such as SFT-25R and SFT40 provide different, more focused beam profiles. Available color temperatures vary by LED, so the combinations shown in the selector are the supported choices for this product.

Lower CCT values, such as 2700K and 3000K, produce warmer-looking light. Around 4000K to 5000K appears more neutral, while 5700K and 6500K look cooler.

Two-Cell Battery Requirement

The T4 must be used with two cells installed. It supports either 2 × AA batteries (1.5V alkaline or 1.2V NiMH) or 2 × 14500 button-top 3.7V rechargeable lithium-ion batteries. The manufacturer also lists compatible 1.6V–1.8V lithium primary cells. Batteries are not included and can be selected separately through the compatible-battery section.

Use two matching cells with the same chemistry, type, capacity, and charge state. Do not mix old and new batteries or different chemistries, and do not operate the flashlight with only one cell.

Configuring the 13 Mode Groups

The mechanical tail switch provides access to 13 mode groups. With the flashlight on, tap the switch rapidly 10 times to enter configuration mode. The light signals menu options through flashes and a buzz-flash; it has no screen or app-based interface.

  1. Select a mode group: At Option 1, indicated by one normal flash followed by a buzz-flash, tap the switch to enter group selection. The flashlight signals the available groups in sequence. Tap while your preferred group is being signaled.
  2. Choose the output sequence: The groups arrange low, medium, and high levels in different orders. Depending on the group, additional functions may include strobe, biking, battery check, or SOS. Group 13 provides 100% output only.
  3. Set mode memory: At Option 2, indicated by two normal flashes followed by a buzz-flash, tap to toggle mode memory. If no selection is made, the light exits setup and returns to its previous mode.

Battery-Dependent Operation and Safety

  • With 2 × 14500 cells, maximum driver current is 3000mA; low-voltage warning and battery-check indication are supported.
  • With 2 × AA cells, maximum driver current is 1000mA. The manufacturer specifies no low-voltage warning or battery-check indication in 1.5V AA mode.
  • The T4 does not have reverse-polarity protection. Check cell orientation carefully before installation.
  • Use button-top 14500 cells for the rechargeable lithium-ion configuration.

Technical Specifications

  • Body material: Aluminum alloy
  • Body color: Gray
  • Battery configuration: 2 × AA or 2 × 14500 button-top cells
  • Interface: Mechanical tail switch with 13 mode groups
  • Maximum driver current: 3000mA with 2 × 14500; 1000mA with 2 × AA
  • Lens: Light-green coated glass
  • Reflector: Orange peel
  • Mode memory: Yes
  • Tailstand: Yes
  • Reverse-polarity protection: No
  • Dimensions: 153.3mm length × 27mm head diameter × 21mm tube diameter
  • Net weight: 98g

Batteries are not included. This listing is for the Convoy T4 Gray aluminum-alloy flashlight.