Convoy T4 Stonewashed Titanium AA and 14500 Flashlight

In stock
SKU: convoy-t4-stonewashed-titanium-519a-5700k
Regular price $55.99

The Convoy T4 Stonewashed Titanium brings a subdued, textured titanium finish to Convoy's compact dual-cell flashlight platform. Its stonewashed surface has a softer, less reflective appearance than polished titanium, giving this version a distinct everyday-carry character. Choose an LED and color temperature from the combinations offered in the selector.

Choosing the LED and CCT

Start with the beam and color quality you prefer. Nichia 519A configurations are a strong choice when natural-looking color is important. SST20 and other available emitters offer different output and beam characteristics, while throw-oriented options such as SFT25R provide a more concentrated beam. The available CCT values depend on the selected LED, so choose from the combinations actually listed on this page.

For white light, lower CCT values such as 2700K and 3000K look warmer; 5000K and 5700K appear more neutral, while 6500K looks cooler. These values describe the LED's light color, not the titanium finish.

Two-Cell Battery Setup

The T4 must be used with two cells installed. It supports either 2 × AA cells (1.5V alkaline or 1.2V NiMH) or 2 × 14500 button-top 3.7V rechargeable lithium-ion cells. The manufacturer also lists compatible 1.6V–1.8V lithium primary cells. Batteries are not included and can be selected separately in the compatible-battery section.

Use two cells of the same chemistry, type, capacity, and charge state. Do not mix cell types, old and new batteries, or cells at different charge levels. Do not operate the flashlight with only one cell.

Configuring the 13 Mode Groups

The mechanical tail switch provides access to 13 mode groups. With the light on, tap the switch rapidly 10 times to enter the configuration sequence. The flashlight communicates menu options through flashes and a buzz-flash; there is no screen or app.

  1. Choose a mode group: At Option 1, signaled by one normal flash followed by a buzz-flash, tap the switch. The light then signals the available groups in sequence. Tap while your preferred group is being signaled.
  2. Choose the output sequence: Groups arrange low, medium, and high levels in different orders. Depending on the group, additional functions may include strobe, biking, battery check, or SOS. Group 13 provides 100% output only.
  3. Set mode memory: At Option 2, signaled by two normal flashes followed by a buzz-flash, tap to toggle mode memory. If no selection is made, the light exits setup and returns to its previous mode.

Output and Battery Notes

  • With 2 × 14500 cells, maximum driver current is 3000mA; low-voltage warning and battery-check indication are supported.
  • With 2 × AA cells, maximum driver current is 1000mA. The manufacturer specifies no low-voltage warning or battery-check indication in 1.5V AA mode.
  • There is no reverse-polarity protection. Check the polarity markings and cell orientation before installation.
  • Use button-top 14500 cells for the rechargeable lithium-ion configuration.

Technical Specifications

  • Finish and body: Stonewashed titanium
  • Battery configuration: 2 × AA or 2 × 14500 button-top cells
  • Interface: Mechanical tail switch, 13 mode groups
  • Maximum driver current: 3000mA with 2 × 14500; 1000mA with 2 × AA
  • Lens: Light-green coated glass
  • Reflector: Orange peel
  • Mode memory: Selectable
  • Tailstand: Yes
  • Reverse-polarity protection: No
  • Dimensions: 153.3mm × 27mm head diameter × 21mm tube diameter

Batteries are not included. This listing is for the Convoy T4 Stonewashed Titanium flashlight.